Polarimetre - Kuvars Plaka Kalibrasyon Standartları
Rudolph Research, laboratuvar cihazları endüstrisinde bilinen en yüksek kalibrasyon standartlarına uymaya çalışmaktadır. Akreditasyon Kapsamımızı görmek için lütfen Kalite sayfamızı ziyaret edin.
NIST ve ICUMSA Standartlarına göre üretilmiştir
Rudolph Research Analitik Kuvars Kontrol Plakaları polarimetreler ve sakkarimetreler için kalıcı bir kalibrasyon standardı sağlar. Her Rudolph kalibrasyon standardı, belirli düzlemsellik, paralellik, saflık ve eksen standartlarına göre üretilen ve parlatılan son derece kararlı kristal kuvars kullanılarak üretilir. Bu standartlar Ulusal Standartlar ve Teknoloji Enstitüsü'nün 61. sayfasında belirtilen spesifikasyonları karşılamakta veya aşmaktadır (NIST) C440 sayılı Genelge veya Uluslararası Tek Tip Şeker Analiz Yöntemleri Komisyonu (ICUMSA). Her Kuvars Plaka, 11 farklı dalga boyunda kalibrasyonu gösteren bir etiket (Resim G), koruyucu bir kutu ve NIST İzlenebilir Sertifikası ile birlikte gelir.
Kuvars Kalibrasyon Standardı Seçme
Kuvars Plaka Seçimi
Her rotasyon mevcuttur ancak genel olarak mevcut stok rotasyonları aşağıda listelenmiştir. Kuvars Plakaların tekli ve ikili versiyonları mevcuttur. Tekli Kuvars Plakalar her dalga boyunda tek bir rotasyon değerine sahiptir ve °Arc (Optik Rotasyon) ve °ISS/°Z (Şeker Derecesi) cinsinden kalibre edilir. Çift Plakalar da °Arc ve °ISS olarak kalibre edilir, ancak her dalga boyunda üç rotasyon değerine sahiptir. Bu mümkündür çünkü her plaka, 2° Ark (+12°-10°) kombine dönüş için ayrı ayrı veya birlikte kullanılabilen bir sol veya levo dönüşlü Kuvars Plakadan (yani -10° Ark) ve bir sağ veya dekstro dönüşlü plakadan (yani +12° Ark) oluşur. Her Rudolph Research Analitik Kuvars Plakası, 589'da ±0,002° Ark rapor edilen bir belirsizlikle üretilmektedir. İhtiyaçlarınıza en uygun Kuvars Aksesuar Plakası için lütfen fabrika ile iletişime geçin.
Uygulamanıza Uygun Bir Kalibrasyon Standardı Seçmek İçin Bizi Arayın
"T" harfiyle gösterilen TempTrol™ Kuvars Plakalar, TempTrol'lü bir Autopol® IV veya V ile birlikte satın alındığında otomatik sıcaklık kontrolü özelliğine sahiptir.
TempTrol Quartz Control Plate A700T-1
Standard Quartz Control Plate A700-1
Has a rotation between +10 to +35 angular degrees (°Arc) or +28 to +102 International Sugar Scale degrees (°ISS)/(°Z). The Quartz Control Plate consists of one right turning quartz plate.
Standard Rotations at 589 nm: 10.5°, 11°, 11.5°, 12°, 12.5°, 13°, 15°, 16°, 20°, 21.5°, 23°, 34°, 34.5°
Accuracy at 589 nm: ±0.002° Arc
TempTrol Quartz Control Plate 300T-S
Standard Quartz Control Plate 300-S
Has a rotation between +10 to +35 angular degrees (°Arc) or +28 to +102 International Sugar Scale degrees (°ISS)/(°Z). The Quartz control plate consists of one right turning quartz plate which is to be within ±0.5° Arc or ±1.5° ISS of the customer’s specified rotation.
Rotation: Customer Selected
Accuracy at 589 nm: ±0.002° Arc
TempTrol Quartz Control Plate A700T-2
Standard Quartz control plate A700-2
Has a combined rotation between +1 to +10 angular degrees (°Arc) or +2 to +30 International Sugar Scale degrees (°ISS)/(°Z). The Quartz Control Plate consists of one left and one right turning quartz plate in separate cells, each of which can be removed from the cell holder for using either plate separately or together for a combined rotation.
Standard Rotations at 589 nm: approx. 1°, 2°, 6° (See Picture H)
Accuracy at 589 nm: ±0.002° Arc
TempTrol Quartz Control Plate 301T-S
Standard Quartz Control Plate 301-S
Has a combined rotation between +1 to +10 angular degrees (°Arc) or +2 to +30 International Sugar Scale degreez (°ISS)/(°Z). The Quartz Control Plate consists of one left and one right turning quartz plate in separate cells, each of which can be removed from the cell holder for using either plate separately or together for a combined rotation. Quartz Control Plates are to be within ±0.5° Arc or ±1.5°ISS of the customer’s specified rotation.
Rotation: Customer Selected
Accuracy at 589 nm: ±0.002° Arc
TempTrol Quartz Control Plate 302T
Standard Quartz Control Plate 302
Has a rotation between -10 to -35 angular degrees (°Arc) or -28 to -102 International Sugar Scale degrees (°ISS)/(°Z). The Quartz Control Plate consists of one left turning quartz plate.
Standard Rotations at 589 nm: -10°, -10.5°, -10.75°, -11°, -11.25°, -12°, -15°, -16°, -22°
Accuracy at 589 nm: ±0.002° Arc
TempTrol Quartz Control Plate 302T-S
Standard Quartz Control Plate 302-S
Has a combined rotation between -1 to -10 angular degrees (°Arc) or -2 to -30 International Sugar Scale degrees (°ISS)/(°Z). The Quartz Control Plate consists of one left and one right turning quartz plate in separate cells, each of which can be removed from the cell holder for using either plate separately or together for a combined rotation. Quartz Control Plates are to be within ±0.5° Arc or ±1.5°ISS of the customer’s specified rotation.
Rotation: Customer Selected
Accuracy at 589 nm: ±0.002° Arc
Kuvars Kontrol Plakalarının Yeniden Kalibrasyonu
Neither NIST nor ICUMSA provide guidelines for the frequency of Polarimeter Quartz Control Plate Recalibration. Since quartz is optically stable over time, changes in its optical rotation are the result of optical stress or surface scratches caused by physical handling. Therefore, it is the opinion of Rudolph Research Analytical that recalibration of a Quartz Calibration Standard every two to three years is satisfactory. For further assistance with quartz accessory plate recalibration, send an email to info@rudolphresearch.com, or call our factory at +1-973-584-1558.
Every Quartz Control Plate is calibrated by Rudolph Research Analytical and is traceable to the National Institute of Standards and Technology (NIST).