AUTOPOL 880 Series – Digital Saccharimeter
This is Rudolph’s most popular saccharimeter. It is used by 98% of all US sugar mills, 100% of all US customs labs and can be found in thousands of sugar mills around the world. It has 0.01 accuracy and is available in both 2 and 4-wavelength versions. Recommended for the sugar industry, the Autopol® 880 digital saccharimeter is a dual wavelength microprocessor-based digital saccharimeter capable of measuring at both 589 nm and 880 nm. The 880 nm ICUMSA Approved near infrared wavelength allows measurement of dark sugar factory juices, while the AUTOPOL® Automatic Saccharimeter Purity Mode allows simultaneous measurement and display of PURITY, BRIX, and POL.
Dual Wavelengths
The most important feature of the AUTOPOL® saccharimeter models IIZ, 880 and 880T are their ability to measure at two wavelengths: 589 nm and 880 nm (NIR). Select 589 nm for conventional analysis using chemicals or lead clarifiers or select 880 nm for polarimetric sugar measurements in the near-infrared (NIR). 880 nm is above the absorption level of most dark sugar factory solutions allowing measurement of filtered but non-lead clarified juices. The dark sample measurement bar gets darker in proportion to the darkness of the sample being measured. When the bar is completely dark the instrument has reached its measurement limit.
Dilution and Cell Length Correction
Whether your sugar analysis requires a 25mm, 50mm, 100 mm or 200 mm cell, whether you use 1/2 normal (13g/100ml), 1/4 normal (6.5g/100ml) or full weight sugar solutions, the AUTOPOL® 880 and 880T saccharimeters provide the correct multiplier to display the reading as if the sample were prepared as a 1 normal solution in a 200 mm optical path-length cell.
Automatic Calibration
Die Kalibrierung eines AUTOPOL®-Saccharimeters ist schnell und einfach. Zuerst wird ein Rudolph-Quarz-Kontrollplatten-Kalibrierstandard auf die optischen Schienen gelegt und der Wert der Quarzplatte in das entsprechende Fenster eingegeben. Zweitens geben Sie die Temperatur ein, um die Messung entweder auf den ICUMSA Standardtemperatur von 20°C oder die tropische Referenztemperatur von 27,5°C. Drittens, drücken Sie 2 Tasten und die Kalibrierung ist abgeschlossen. (Siehe Technisches Bulletin 913 für weitere Einzelheiten über Rudolph-Kalibrierstandards)
Automatic Temperature Correction
Alle AUTOPOL®-Saccharimeter-Modelle haben einen Temperaturfühler im Messraum. Die Sonde kann in alle 14, 40T, 41T und 33 Messzellen eingeführt werden.
The AUTOPOL® 880 displays the temperature source and type of correction. Utilizing factory-programmed temperature coefficients the AUTOPOL® 880 can make the following types of temperature corrections:
- A 30° C sucrose sample can be measured by the temperature probe and corrected to 20°C or 27.5°C or a customer-defined temperature.
- Eine 29°C-Saccharoseprobe in einer zentrisch gefüllten Glaszelle vom Typ 14 kann mit dem Temperaturfühler in der Probenkammer gemessen und auf 20°C korrigiert werden.
- Eine Quarzplatte, die bei 25°C von der Kammertemperatursonde gemessen und dann automatisch auf 20°C korrigiert wird.
Rudolph knows Sugar Technologists around the world demand 24-hour operation, 7 days a week for up to 9 months out of the year. They expect 0.02 °Z reproducibility and accuracy. Rudolph Research understands these demands and requirements because Rudolph has been serving the sugar industry since 1940. Throughout those sixty plus years, Rudolph has dedicated itself to manufacturing quality instrumentation and providing superior technical and service support, both directly and through its worldwide dealer network. This dedication is consistent with Rudolph’s over 5,000 instruments installed worldwide, with many of those instruments still in operation after 25 years of service.
TempTrol® Solution (included with Autopol® 880T and 880T Plus only)
Patented TempTrol® Technology Eliminates the need for a water bath.
Rudolph Research Analytical bietet ein umfassendes Angebot an Programmen für vorbeugende Wartung und Service. Rudolph hat sein Engagement für seine Kunden bewiesen, indem es installierte Instrumente nicht nur seit 20 Jahren, sondern in einigen Fällen seit über 40 Jahren in Betrieb hält. Diese langfristige Verpflichtung, unsere Instrumente in Betrieb zu halten, macht die Betriebskosten über die gesamte Lebensdauer eines Rudolph Instruments zu einem der niedrigsten im Labormarktsegment. Zum Zeitpunkt der Veröffentlichung dieses Dokuments gibt es keinen anderen Hersteller von Laborgeräten, der Service und technische Unterstützung für 20 Jahre garantiert. Sehen Sie sich die gesamte 20-Service-Garantie an.