Return to course: Setting up a Rudolph Research Automation System
Rudolph Research Analytical
Previous Lesson
Previous
Next
Next Lesson
Setting up a Rudolph Research Automation System
Introduction
Introduction
Section 1 : Metrohm pH Electrode Setup
Step 1: Parts and Preparing the pH Electrode
Step 2: Assemble the housing that will attach the pH electrode to the Refractometer
Step 3: Attach the Refractometer Optics Plate Mounting Block and pH Electrode Cable
Step 4: Connecting the Electrode Cable to the pH Meter
Section 2 : Integrating Communication and Power Seamlessly
Integrating Communication and Power Seamlessly
Gather Parts for setting up Refractometer Communication
Connecting the Refractometer to the power source
Connect the Saccharimeter to the Density Meter
Connect the Density Meter to the Valve Box and Spectrophotometer
Connect the Density Meter to the pH Meter
Setting up power for the system
Section 3 : Connecting the Plumbing for the System
Setting up Plumbing Introduction
Introduction to Port Fittings
Gathering the Parts for the DP Head
Assembling the DP Head
Attaching the DP Head to the refractometer
Attaching the tubes to ferrules
Running the plumbing
DIAGRAMS
Communication and Power Diagram
Plumbing Diagram
Connect the Density Meter to the pH Meter
